DP> Hello Laszlo, I'm a pro sound installer. Just a observation from reading 
yo
DP> message. As for the lamps dimming on your mixer when you push it. It 
ould
DP> sound like your overoading your power line in some way. Keep in mind if 
you
DP> power feed from the fuse/breaker panel in long or a little small in gauge
DP> you'll get a dip in AC voltage. Hence your lamps dimming from a 
signifacant
DP> voltage dip. A lot of high powered amps draw close to 15amps alone. Just
DP> because your not popping the breaker doesn't mean everthing is fine. 
Check 
DP> little deeper.
I have this very same problem with my Gemini mixer, and the light dims 
hether
I am running any amps or not.. it seems that the power supply inside the 
ixer
is insufficient and is at fault. the light is one the same voltage rails as 
the VU meters, and those rails dip when the VUs get high.
this may be a different problem though.
Jason Lavoie
--- Renegade v10-31 Exp
---------------