>   Re: setting up hobbynet woes
>   By: Rixter to all on Sun Dec 01 2024 09:18 am

> Howdy,

> So if stuff is coming into "nonsecure", then there is issues with
> authentication.

> Make sure the following:
> * The "session" password is case sensitive (when using CRAM-MD5) - so make
> sure your passwords have the same case.

> * Also make sure, since Mike run's two networks, that your binkp password is
> the same for both networks. In the above outbound, your authentication might
> have passed for 999:*, but might be silently failing for 954:*

> ...ииии

> ---
>  и Synchronet и AnsiTEX bringing back videotex but with ANSI


I should say the areafix login and requests are generating error level 0. There
is obviously an authentication error somewhere. My password is 7 numbers and it
works for areafix. I asked mike to change  it to a mix of numbers and letters
today. Maybe that is the fix to the problem. It's got me aggravated because
setting up fsxNet was a 20 minute fast setup and running deal. Thanks for
writing back to me.

telnet://ricksbbs.synchro.net:23
http://ricksbbs.synchro.net:8080
Madison,NC

---
 ■ Synchronet ■ Rick's BBS telnet://ricksbbs.synchro.net:23