Message-ID: 
Newsgroups: AIRGUN.LIST
Tim Mcmurray wrote:
> Tim,
What you didnt say is that if the stock gun is over-pumped is will probalby
blow out the exhaust valve seal in very short order.  Without the harder
seal, the gun doesnt like being pumped more than 8 times.
ld--------------------------
> : : Lever is beefed up.
>
> I want to add that anybody who has bought a Benjamin/Sheridan in the
> last 6 years can benefit from the beefy lever mod
> which places a third support pin to integrate the wood structure into
> the support of the lever. I have offered in the past for
> people to send there gun in for the beefy lever mod and the trigger mod
> for $25 and I will throw a bottle of secret sauce in.
> This is the best thing you could do for this model to get the best life
> from a part that really suffered from poor engineering in
> stock trim. The third pin solves that problem. Whether the factory makes
> that change is the question. If you want to drill your
> own it is a .125 hole 3.5 " from the front hole slightly closer to the
> centerline of the action than the other two pins. Be sure to
> pin it with a pin and try to drill it as straight as possible thru the
> lever and you want to hold the forearm firmly against the tube
> when you drill the hole. I have given this mod to crosman and it is up
> to them what they will do with it. Now I give everyone
> else the specs and you too can drill holes in the side of your gun to
> make it better. Just take care cause if you slip. OOUPPS!
>
> Later
>
> Tim
--- QScan/PCB v1.19b / 01-0671
---------------