From: Garey Barrell 
Subject: Re: [drakelist] L4 relay


Garey Barrell  made an utterence to the drakelist gang
----------------------------------------------------------------------
Hi Evan -

Just adjust the Cutoff Bias contact so that it closes a fraction AFTER 
the RF In and Out contacts close.  That's probably better, since the 
cathodes of the 3-500Z's would be "floating" during the transition, so 
no output while the RF In and Out were getting themselves sorted out.   
On Break, it really doesn't matter, since the VOX delay drops after the 
RF Input ceases.  That's probably what Drake did.

73, Garey - K4OAH
Atlanta

K9SQG{at}aol.com wrote:

>Drake enthusiasts,
>
>A number of years ago I talked with Drake and they indicated that each
relay is individually calibrated/altered to ensure that the various
contacts opened/closed in the right sequence to avoid problems.  Never got
any more rationale and can't venture an expert opinion on this one.
>
>73s,
>
>Evan
>
>  
>
----------------------------------------------------------------------
On Behalf of Garey Barrell 
Submissions:        drakelist{at}www.zerobeat.net
Unsubscribe:        majordomo{at}www.zerobeat.net - unsubscribe drakelist in body
Hopelessly Lost:    majordomo{at}www.zerobeat.net - help in body of message
Zerobeat Web Page:  http://www.zerobeat.net
Brought to you courtesy of TLCHost.net  http://www.tlchost.net/
----------------------------------------------------------------------

---