KB>I was on the Supra web site and read about the 33.6K FlashRom
KB>Upgrade.  I downloaded the flasher and read the instructions.
KB>I own a 288 v34 external modem.  When I ran the flasher, it didn't
KB>I tell me that needed to send it to the factory and it allowed me to
KB>I flash the modem.
KB>I then tested the modem to see if I could connect at a higher rate.
KB>I connected to my fileecho link at 31200 (great!), but the modem
KB>cycled through its display (CD, LP, DC, R34, 31, T34, 28...) rather
KB>quickly and never showed the connection (using FrontDoor).  After
KB>awhile, it hung up and the screen displayed "Carrier Detected" and
KB>"Carrier Lost".
 PM>         This sounds like you need to reconfigure the settings for
 PM>         FD into the modem.
I did reconfigure the modem, as I always do after I flash it.  I use a pretty 
plain AT command set, write it to NVRAM, then use ATZ for the init string.
It does connect, but it won't go any farther than the dialing box on FD - the 
connection box never pops up...
--- GEcho/32 1.20/Pro
---------------