Re: Connect...??
  By: Nicholas Boel to Bill McGarrity on Thu Jan 12 2017 18:19:46

 BM>> My router is a Linksys WRT1900AC and I have done all you've stated.
 BM>> I've enabled IPv6 firewall and then added a port service using the
 BM>> IPv6 address for the pi.  I also set a single port forwarding for
 BM>> the IPv4 NAT address. Still nothing.  The INA I'm using is:
 BM>> hub.tequilamockingbirdonline.net 24555

 BM>> I'm back playing in the router now....pain in the ass... lol

 NB> If everything you try seems to fail, you may want to see if there's an
 NB> update for your router firmware. If you're using the original firmware
 NB> from when you bought it, there may be a newer version out there. Take a
 NB> look at the changelog 
 NB> and see if there was anything IPv6 related that could be causing whatever
 NB> issues you're having.


I originally purchased that same router.  Was unable to get incoming IPv6
traffic with it, no matter what I tried.  Took it back and got a Dlink version
of it instead.  That worked.  TPlink also would not allow incoming.  That was
permanently filtered I was told
--- SBBSecho 3.00-Win32