Hallo Frank
 HO> megs there is no problem.
 HO> I use the 486DX100 and a Adeptec VLB 2842A SCSI.
 HO> I have put the following, Set Auto regester memory 
 HO> above 16 megabytes=off
 HO> load disk driver
 HO> register memory 1000000 1000000  
 FR> IN startup put SET RESERVED BUFFERS BELOW 16 MEGS = 200
Sorry Frank Did not work.
A friend of mine  a CNE said I need a faster Ethernet Adapter
I use the Ne2000 card.
 FR> The VLB based SCSI requires buffers as above when you 
 FR> have more than 16 megs of memory in the server.
But found the problem, swapt the memory chips around in the server
found that the server would not load on the last set but would add to the
memory count giving 32 megs.
Then swapt the chips from a 586, 133mhz  put them in the server
and all works well.
Have to see if I get any error now in the 586 :)
Moved a 10,895k file to the server and got 52 seconds
with no errors, Cant complain about that.
Tought I might post it here, could help sombody else
Thanks for your help Frank
Cheers Harry
--- Maximus/2 3.01
---------------