From: "Gene McCalmont" 
Subject: RE: [drakelist] L4-PS R12 burned - .825 ohm 2W resistor on pin 6
of cable harness
Organization: RowdyHD Inc.

handling the entire load while the other was not doing anything.  Filaments
were lit on both tubes. 


I will take a drive by the parts store today and dig up some of those
resistors.  And will take OUT that tube that went dark.  No idea why it
would go dark and the other pick up the load - would a grid-to-filament
short cause this?


Thanks,
Jason

----------------------------------------------------------------------
On Behalf of "Gene McCalmont" 
Submissions:        drakelist{at}www.zerobeat.net
Unsubscribe:        majordomo{at}www.zerobeat.net - unsubscribe drakelist in body
Hopelessly Lost:    majordomo{at}www.zerobeat.net - help in body of message
Zerobeat Web Page:  http://www.zerobeat.net
Brought to you courtesy of TLCHost.net  http://www.tlchost.net/
----------------------------------------------------------------------

---