From: "Bill Ellis" 
Subject: [drakelist] Another outdoor connection question


"Bill Ellis"  made an utterence to the
drakelist gang
----------------------------------------------------------------------
Thanks to all who responded to my question about "Krylon". I chose the coax
seal for that problem.

I have another situation this time it's with the Hustler 6-BTV Vertical I
just purchased and am assembling. The connection to this antenna is by
opening the end of the coax, about 2 inches, and making two leads, one with
the braid and one with the center lead. They are then soldered to two
lugs(supplied) and then srewed to the bottom of the vertical. It seems the
only way I can weather protect this connection is with the Acrylic Plastic
spray someone suggested. Any other thoughts?

Thanks for any help,

Bill Ellis, WB9CAC
wb9cac{at}comcast.net

















----------------------------------------------------------------------
On Behalf of "Bill Ellis" 
Submissions:        drakelist{at}www.zerobeat.net
Unsubscribe:        majordomo{at}www.zerobeat.net - unsubscribe drakelist in body
Hopelessly Lost:    majordomo{at}www.zerobeat.net - help in body of message
Zerobeat Web Page:  http://www.zerobeat.net
Brought to you courtesy of TLCHost.net  http://www.tlchost.net/
----------------------------------------------------------------------

---