Hi Torsten!

17 Dec 2016 00:47, from Torsten Bamberg -> Richard Menedetter:

 RM>> I have compiled binkd myself.
 RM>> Strangely it does not send the CRYPT option ...
 RM>> did I miss a configure flag that I need to set??
 TB> Well, possibly you didn't link all files into binkp.
 TB> The crypt option is hardcoded. Just take a look at crypt.c.

Hmm ...
It links with -lcrypt ... and I thought it is not sending the CRYPT option, but
the LOG from your side shows that I am sending it to you.

I am not sending it to OpenXP when I poll my sysop point:
To:        NETCALL (All)
From:      Richard Menedetter @ 2:310/31.1  (fido.ricsi.priv.at, Vienna A)
Subject:   Netcall to 2:310/31
Date:      Sa 17.12.16, 04:08
Size:      509 Bytes
-------------------------------------------------------------------------------
----------------
= 04:08:13  CONNECT
  04:08:13  OPT CRAM-MD5-a24e327d4abfb5f5982c181d162c3bee
  04:08:13  SYS fido.ricsi.priv.at
  04:08:13  ZYZ Richard Menedetter
  04:08:13  LOC Vienna,Austria
  04:08:13  NDL 115200,TCP,BINKP,XW,CM,MO,IBN,INA:fido.ricsi.priv.at
  04:08:13  TIME Sat, 17 Dec 2016 04:08:26 +0100
  04:08:13  VER binkd/1.1a-75/Linux binkp/1.1
  04:08:13  TRF 0 0
  04:08:13  OPT EXTCMD GZ BZ2
  04:08:13  secure
= 04:08:13  hangup
- 04:08:13  exiting

No clue why.

 TB> The options inside the makefile are to use the compression.
 TB> To use the compression makefile flags you need to have zlib and/or
 TB> bzip lib installed and compiled correctly.

I have BZ2, ZLIB and Perl active.

 TB> BTW: binkd is actually at version binkd1.1a-95.
 TB> binkd1.1a-75 is outdated. ;-)

I know ... I will migrate the fido system to this virtual server:

root@vserv:~# binkd -vv
Binkd 1.1a-94 (Dec  8 2016 11:29:32/Linux)
Compilation flags: gcc, zlib, bzlib2, perl.
Facilities: fts5004 ipv6

Just did not have time/motivation to do so.

 TB> If you want me to test your version, just switch binkd (you compiled
 TB> by your own) to a different port. Maybe port 25554, and I'll start
 TB> connecting to your test binkd as well.

Strangely it seems that I already send the option to you.
So I am sure the "other" binkd on the new vserver is OK as well.
So all is fine.
I just do not get why I am not sending the crypt option to sessions with my
sysop point.

Anyways thanx for the answers.
I will check once more after I migrated, but I assume all is fine ...

CU, Ricsi

--- GoldED+/LNX