Hello All!
I thought that I was loosing what little sanity I have left with this 
problem, but I discovered the answer.
I did a no-no by installing OS/2 Warp 4.0 over Warp 3.0 FP26.  However 
everything worked with the exception of the DOIP program.  I would start it 
and it appeared as if it was not calling SLATTACH properly.  I tried to start 
SLATTACH to call PPP.  I would get an error that none of my three comports 
were working.  So, I thought, see if PPP will run with my PPPOPTS.DAT file.  
No-go. It would start, but then stop when it was supposed to "talk" to my 
modem. Cntrl-C killed it off.  Did this several times, including one 
unnecessary reboot of the system.  Then I thought that I copied my PPP.exe 
from Warp 3.0 with the IAK fix.  I switched them around and all is working.
So, it appears as if the PPP.exe from Warp 4.0 is broken and might be the 
cause of other problems I experienced before I removed one of my drives.
Anyone else found this to be the case?
James
... DOS + Windows + ATM < OS/2 Warp
--- GoldED/2 2.50+
(1:309/63)
---------------