KP>*** WANTED ***  Help with SHARP PC-3000 PalmTop RS232 cable  ***
KP>WANTED *** 

KP>Hi, I recently purchased a SHARP PC-3000 PalmTop.

KP>Can anybody help me out with the following?

KP>* Serial Conversion Cable (CE-302CB)
KP>* LAPLINK Cable (CE-303CB) {requires serial conversion cable}

KP>Both the PC-3000 and accessories are no longer available through
KP>SHARP. But  there should still be a fair bit of stock floating around
KP>in small retail outlet's across Australia, so if you do 
KP>happen across these or any other accessories please netmail 
KP>me. 

KP>There also used to be a 1.44MB FDD unit (CE-301F), & 
KP>Parallel Conversion Cable (CE-301CB) available as well. 

KP>Most importantly I require the serial interface cable (to 
KP>transfer files to the unit) as without this it is nothing 
KP>more than a glorified pocket organiser.

KP>If anybody has any technical knowledge on these unit's a 
KP>pinout description of the RS232 port would at least allow 
KP>me to try and fabricate something to get me out of trouble!

KP>The port is as follows.

KP>\ - - - - - /
KP> \- - - - -/
KP>10 pin's in a mirco tongue D connector. The tongue being 1mm thick x
KP>7mm wide! 

KP>Also if anyone know's the wireing for a 9pinD to 9pinD RS232 LAPLINK
KP>cable? 

Ken, Cable details posted in Z3_tech for you
___
 * CMPQwk #1.4 * UNREGISTERED EVALUATION COPY

--- Maximus/2 3.00.509 beta