TIP: Click on subject to list as thread! ANSI
echo: drake
to: All
from: `David Havel`
date: 2005-02-28 19:57:34
subject: 02:RE: [drakelist] 20.8 MHz (30 Meter) T-4XC Crystal wanted

From: "David Havel" 
Subject: RE: [drakelist] 20.8 MHz (30 Meter) T-4XC Crystal wanted

go with=20
them again for my T-4XC.  You do need to call them with your credit =
card=20
info, as they're not set up for online=20
ordering.
 
Vy 73,
 
Dave -
NO3K


From: =
owner-drakelist{at}www.zerobeat.net=20
[mailto:owner-drakelist{at}www.zerobeat.net] On Behalf Of Eric=20
WebnerSent: Monday, February 28, 2005 7:27
PMTo: =
Ken,=20
WA2LBICc:
DrakelistSubject: Re: [drakelist] 20.8 =
MHz (30=20
Meter) T-4XC Crystal wanted

The bottom line is that a crystal in the receive accessory slot =
will make=20
the radios behave just as on any band that is pre-installed.
 
I bought crystals years ago from Jan Crystals. I looked at their =
web site=20
yesterday, but was not impressed. Can you order them online, or is it =
better to=20
just call them and tell them what I need, and for what radio?
 
Eric
KA8FAN
"Ken, WA2LBI"
<wa2lbi{at}frontiernet.net>=20
wrote:
Eric,The=20 Drake manual is not in front of me and I forget which xtal freq is for = 10.0MHZ, WWV, but that is 30 meters. Once you get that working on = receive=20 it is assimple as you describe to operate transceive. Just set the = T-4XC=20 mode switch to"RECEIVE" and use the receiver PTO to control = transmit and=20 receive on the 30meter band. If you put a 30M xtal in the = transmitter then=20 you can also use thexmit PTO to control transceive. The transceive = procedure is the same for allbands.I have been getting my = xtals=20 from JAN Crystals. They are about $14 and areguaranteed. If you = get a used=20 one it will probably cost about $10-$12 and haveno = guarantee.Ken,=20 WA2LBIQuoting Eric Webner = :> I=20 wonder if the 21.1 Mhz crystal would work as well. It sure would be a=20 lot> easier to operated the vfo,! since the band would start at = 10.0=20 Mhz instead of> 9.7 or whatever the manual = says.>> Can=20 you experts tell me what it takes to transceive on accessory = crystals?>=20 Can I get a crystal for the receiver, set the T-4XC mode switch to=20 "RECEIVE"> and be able to transmit and receive on the 30 meter=20 band?>> 73,>> Eric KA8FAN>> = David=20 Havel wrote:>> Hello=20 gang,>> I'm in search of a 20.8 MHz crystal for my T-4XC = in=20 order to put it on 30> meters. According to the manual, the = 20.8 unit=20 is the only recommended> crystal for use on this band. If you = have one=20 you'd like to sell, please> email me what you're asking for=20 it!>> Thank you in advance & 73,>> = David Havel=20 - NO3K>>> = ---------------------------------> Do=20 you Yahoo!?> Read only the mail you want - Yahoo! Mail=20 ---
* Origin: The Barter Board Internet Gatway (1:261/1551)
SEEN-BY: 633/267 270 5030/786
@PATH: 261/1551 105/1 261/1352 38 123/500 106/2000 633/267

SOURCE: echomail via fidonet.ozzmosis.com

Email questions or comments to sysop@ipingthereforeiam.com
All parts of this website painstakingly hand-crafted in the U.S.A.!
IPTIA BBS/MUD/Terminal/Game Server List, © 2025 IPTIA Consulting™.