From: "sebdesn" 
Subject: RE: [drakelist] TR7 Display Problem


"sebdesn"  made an utterence to the
drakelist gang
----------------------------------------------------------------------
Guys, The whole fix was the result of Bill Frost suggesting to make sure the
24v was at the VCO board and then when it was, to check that choke, which
was open. That board had never been out of the rig before the problem. It
was not out until Bill suggested I check it...When I unsoldered it one lead
came loose from the body of the choke, but I don't know if I did it
unsoldering it or it was already cracked. There Is also the possibility that
when the original damage to the P/s board occurred it took out the choke. I
guess when the 24v goes away from the VCO board the display reads 96
MHz....Anyway It was Bills direction that led to the fix...

73,de Bud WØHG


----------------------------------------------------------------------
On Behalf of "sebdesn" 
Submissions:        drakelist{at}www.zerobeat.net
Unsubscribe:        majordomo{at}www.zerobeat.net - unsubscribe drakelist in body
Hopelessly Lost:    majordomo{at}www.zerobeat.net - help in body of message
Zerobeat Web Page:  http://www.zerobeat.net
Brought to you courtesy of TLCHost.net  http://www.tlchost.net/
----------------------------------------------------------------------

---