Hello Rj,

On 15 Oct 16 12:26, Rj Clay wrote to Nicholas Boel:

 >>>> Cannot find domain for zone 2, assuming 'fidonet'
 >>>> Cannot find domain for zone 3, assuming 'fidonet'
 >>>> Cannot find domain for zone 4, assuming 'fidonet'

 RC>   Do/did you have those zones defined in the config?  (Thought the
 RC> default config already had those...)

Why would you define addresses you don't have? I don't have a zone 2, 3, or 4
address. No need for defining.

 >>>> These are repeated multiple times for each. Obviously I
 >>>> understand that I don't have a zone 2, 3, or 4 address, but I do
 >>>> have links in those zones. And I understand this is not breaking
 >>>> anything. It's more of an annoyance than anything. Hundreds of
 >>>> these log entries every time upon config change or startup just
 >>>> seems like it could be avoided somehow.
 >>>> Is there any way to specify that zones 1-4 all fall under the
 >>>> 'fidonet' domain so I don't get these errors in my logs?

 RC>   Define them in the same way that zone 1 (in your case) is defined.

The reason it was happening is because BINKP.TXT did not have domains listed in
it. I have created my own binkp.txt and all is fine now.

Regards,
Nick

... "Take my advice, I don't use it anyway
--- GoldED+/LNX 1.1.5-b20160827