It was on 06-22-96 when GEORGE FLIGER typed...
GF|CB> I have a generic ne2000 compatible network card that I set on
GF|CB> Irq  9/2 using the EZSET program on it's accompanying floppy.
GF|CB> Once it  was set on that particular Irq and attempt to change
GF|CB> it  (whether in  a Dos window or in Dos mode on Win95)
GF|CB> freezes up the entire machine  forcing me to reboot.
GF|Two choices I can think of.  One, create a Win95 DOS boot
GF|diskette (format a: /u /s) and boot from that floppy, then try
GF|reconfiguring the card.  If that doesn't work then the second
GF|option would be to pull the card from that machine and place it
GF|in another machine not running Win95 and attempt to configure it
GF|there. If the above two suggestions don't work I'd be inclined to
GF|believe the NVRAM on the NIC has gone bad.  In that case, there's
GF|nothing you can do short of sending the card back to the
GF|manufacturer for refurbishment (most NIC's nowadays carry a
GF|lifetime warranty - you pay only shipping/handling).
I've tried switching the card to some other machines which didn't 
work but I didn't think of booting from a floppy.  I'll give that 
one a try as soon as I can.  Thanks.
 ÖÄ       ÖÄ º
 ÓÄ Ç¶ Ó½ ÓÄ Ç<   06/23/96 4:05PM   chuckburgin@tao.agoron.com
þ CMPQwk 1.42 1159 þProofread carefully to see if you any words out.
--- QScan/PCB v1.17b / 01-0035
---------------