TT>Help!  Any electronics whizzes out there help!  Please!  
TT>I've gone and stuffed my ProCo Rat II into a rack-mount chassis with a
  >fairly well-filtered power supply (12vdc Shure wireless x-fmer, 7812, and
  >a pair of 220mfd/35v caps).  I managed to get all the control pots, LED,
  >and circuit board mounted fine - but now I've got an annoying problem
  >with audio "pops" whenever I use the remote footswitch to take the fuzz
  >box _out_ of the signal path.  Switching's being done by a mini DPDT relay
  >with 12VDC coil.  The DPDT is necessary to maintain the Rat's out-of-line
  >bypass mode.
Are the in/outputs isolated with a capacitor?  You might be getting a
charge forming on it which is then routed into your signal path when the
relay operates...  Try placing a 47K ohm ( or thereabouts - 10K through
1 Meg would be fine! ) from the input to ground and from the output to
ground.
ANyway, good luck - TTYL - Dave
---
 * QMPro 1.53 * Red ship crashes into blue ship...    Sailors marooned...
---------------