Greg, when the users read the bullet(x).bbs they get to the third
one and the system freezes up.  The system locks and I have to cold
boot to get running.  Any suggestions/comments?  Anyone else
experiencing the same?
Dane
--- RyPacker v2.7
---------------
** A related thread FOLLOWS this message.

FIDO MESSAGE AREA==> TOPIC: 256 RYBBS         Ref: C3PE2681 Date: 03/20/95
From: GREG RYAN (Co-Sysop)                                  Time: 10:44am
\/To: DANE KNUDSON                                        (Read 8 times)
Subj: R: System freezes

DK>Greg, when the users read the bullet(x).bbs they get to the third
DK>one and the system freezes up.  The system locks and I have to cold
DK>boot to get running.  Any suggestions/comments?  Anyone else
DK>experiencing the same?
DK>Dane
DK>--- RyPacker v2.7
you mean the third bulletin?  i've not heard of anything about
this...anything unusual about that bulletin?  how long has this been
going on?
greg
---------------
>>>>>>>>>>>>>>>>>>>>>> LAST Message In Thread <<<<<<<<<<<<<<<<<<<<<<

FIDO MESSAGE AREA==> TOPIC: 256 RYBBS         Ref: C3S00000 Date: 03/22/95
From: CHRISTOPHER YOUNGER                                   Time: 12:51pm
\/To: SYSOP                                               (Read 7 times)
Subj: RyBBS problems

Greg,    It seems that I have been given the task of running a bbs here at my 
place of work.  As it turns out, we have been running RyBBS v7.1 and it has 
been working well.  Unfortunately, I want to move the BBS to another computer 
with a new modem.  So far, I have had no luck in this endeavor.  My lastest 
problem for the past week is that when I boot up the BBS, it initializes the 
modem and then reboots my system!  Needless to say, this won't do.  I will 
give you a quick run down of the system specs to see if you know offhand what 
my problem might be.          Compaq Prolinea 3/25s w/Cyrix chip upgrade to 
486/25 sx         8 MB RAM         87 MB Hard Drive Space         Single-user 
only         Hayes Compatible 2400 Baud Modem         Also the machine will 
be attached to a Novell Network, but the prob del  evelop before the network 
i  Anything you can do to help would be greatly appreciated!  Thanks in 
advance  Chris  --- RyPacker v2.7
---------------