TIP: Click on subject to list as thread! ANSI
echo: crafting
to: LIZ WILLIAMS
from: LEE ANN HAMM
date: 1997-11-01 09:40:00
subject: Crochet Angel 1/2

  >            I am looking for 'flat' crochet angel patterns, ones that can 
be
  >used for tree ornaments.  Also, any filet mesh patterns with angels for
  >placemats.  Any help would be greatly appreciated!
Oooooh, then you've come to the right place then . . . . I have several
off the 'Net and I'll post them here (I'm pretty sure these are flat,
but I haven't made all of the patterns up yet):
Also, Leisure Arts has some nice angel patterns and you might want to
try calling Annie's Attic (800-LV-ANNIE), House of White Birches
(800-347-9887) and Herschnners (but I don't have their phone number
right now).  Good luck! :-)
``````````````````````````
                           Angel Pin by Rhoda Stelling
     MATERIALS
   * Size 10 crochet cotton thread
   * Size 5 steel hook
   * cotton to stuff head
   * 1 small safety pin
   * 6" of 1/8" ribbon for waist if desired
   * needle and thread
     PROCEDURE
     Decrease - yo, pull up a lp in each of 2 next hdc, YO and draw through
     all loops, dec made Head:
   * Row 1 - ch 2, 6 sc in 2nd ch from hook (use marker to show row
     beginning) work around not joining in rows
   * Row 2 - 2 hdc in each sc around (12)
   * Row 3 - hdc in each hdc around
   * Row 4 - hdc in each hdc around
   * Row 5 - hdc in each hdc around
   * Row 6 - hdc in each hdc around dec in every third stitch slip stitch
     to beginning of row, do not finish off
   * stuff head with cotton
     Wings: work in rows around sl stitch at end of each row
   * Row 1 - ch 1, sc in same st, 2 sc in each hdc across, sl st to beg. of
     row (18)
   * Row 2 - ch 3, dc in same st, 2 dc in each sc around, sl to beginning
     (36)
   * Row 3 - ch 1, sc in same st, sc in next three dc (these 4 sc are the
     front of the waist....now we're starting the wing...ch 2, skip 2 dc, 3
     dc in next dc, ch 2 and skip 2 dc, 5 dc in next dc, ch 2 (this is the
     top of the wing) skip 2 dc, 5 dc in next dc, ch 2, skip 2 dc, 3 dc in
     next dc, ch 2, skip 2 dc, sc in next dc,
   * NOW FOLD INTO WING POSITION, sl st into 4th sc of row and continue
     with 1 sc in each of the next 4 dc (forming back side of waist), ch 2,
     skip 2 dc, 3 dc in next dc, ch 2, skip 2 dc, 5 dc in next dc, ch 2
     (this is the top of the wing) skip 2 dc, 5 dc in next dc, ch 2, skip 2
     dc, 3 dc in next dc, ch 2 and skip 2 dc, now fold into wing position
     and sl stitch to sc form waist. Do not finish off.
     For Skirt :working around sc only
   * Row 1 - Ch 5, dc in next sc, ch 2, dc in next sc, ch 2, dec in next
     sc, repeat pattern around waist. sl st to beginning chain 3 of chain
     5.
   * Row 2 - sl st into ch 2 space, ch 3 (this counts as first dc), 2 dc in
     same sp, ch 1, 3 dc in ch 2 space, ch 1, 3 dc in ch 2 space, ch 1,
     continue pattern around, sl st to ch 3 of beginning ch 3
   * Row 3 - ch 1, sc across, sl st to beginning of row
   * Row 4 - ch 1, skip 1 sc, 5 dc in next sc, skip 1 sc, sc in next sc,
     skip 1 sc, 5 dc in next sc, skip 1 sc, sc in next sc, repeat pattern
     around. Finish off
   * Halo - ch 10, sl st to join ring. ch 1 *sc, ch 1, hdc, ch 1* repeat *
     to * to fill halo. Finish off. Attach to head using needle and thread.
   * Attach safety pin to back of angel using needle and thread
   * Weave 1/8"ribbon around waist and tie in bow. (This was suggested by
     Tobi who also suggested that it would make a cute fridgie.######
```````````````````````````
Yep, that is where I got it and here is the URL:
http://members.tripod.com/~sclend/FreePatterns
Angel Bookmarker
Materials:
#10 crochet thread
1.75mm steel hook
Head: ch2
Rnd 1: 10dc in 2nd ch from hook,join with slip st to 1st dc.
Rnd 2: ch3(counts as 1st dc now and throughout),dc in same st,2dc in each
dc around;join with slip st to 1st dc(20dc)
Note:Do NOT fasten off,start working in Rows
Body:
Row 1:ch3,3dc in same st as joining,4dc in next st on head,turn.(8dc)
Row 2:ch3,dc in same st,dc in each across to last st,2dc in last
st,turn(10dc)
Rows 3-13:ch3,dc in next st and in each st across, turn(10dc)
Row 14:ch3,dc in same st,dc in each st across to last st,2dc in last
st,turn(12dc).
Row 15:ch3,dc in same st,dc in next 5 dc,ch3,dc in next 5 dc,2dc in last
st.Finish off.
Right Wing:with wrong side facing,join thread with slip st to row 2 of
body.
Row 1:ch4,sc in same sp as joining,ch3,sc in next sp.,ch3,sc in same
sp.,turn(3 loops)
Row 2:slip st in 1st loop,ch4,sc in same sp. *ch3,sc in next loop,ch3,sc in
same loop;Repeat from * once MORE,turn(5 loops)
Row 3:slip st in 1st loop,ch6,sc in same sp.,*ch5, sc in next sp,Repeat
from * 3 times MORE,ch5, sc in same sp.,Finish Off
Left Wing:Repeat as for right wing, but have the right side facing.
Finishing:
Make tassel and attach to ch3 sp. on Row 15 of body.
Press and Starch as desired.
``````````````````````````````````
Little Angel (approximately 3")
DMC Brilliante or bedspread weight cotton, white
steel hook, size 9
Head: Work head in rounds without joining. Use a contrasting color thread
to mark the rounds .
Rnd 1: Ch 2, work 13 sc in 2nd ch from hook, mark round.
Rnd 2: Sc in first sc, *(2 sc in next sc) twice, sc in next sc; rep from *
around (21sc.)
Rnds 3-8: Sc in each sc around (21sc)
Rnd 9: *(pull up a lp in each of next 2 sc, YO and draw through all 3 lps
(dec made) twice, sc in next sc; rep from * around. 13 sc. Firmly stuff
head.
Rnd 10: Sc in each sc around. 13 sc
Do not finish off.
Wings
Rnd 1: Ch 3, (counts as first dc) (2 dc in next sc) 12 times, join with sl
st in 3rd ch of beg ch 3. (26 sc)
Rnd 2: Ch 4 (counts as first trp) tr in same dc, 2 tr in each dc around.
Join with sl st to beg ch 4.
Rnd 3: Ch 1, (first sc), sc in same tr, (2 sc in next tr) 5 times, ch 2, sk
next tr, (*2 dc, tr, 2 dc in next tr))(shell), ch 2, sk next tr, sc in next
tr, ch 2, skip next tr * repeat from * to * 3 times more, (2 dc, tr, 2 dc
in next tr) ch 2, sc. fold wings in half with wrong sides together, join
first ans last shell together with a sl st in the first ch of ch-2 before
beg. shell. (2 sc in next tr) 6 times, ch 2, skip next tr, repeat from * to
* 5 times, ending by working last sc, join first and last shells of 2nd win
as before. Sl st in beg ch of round.
At this point, you have both the wings done, and 12 sc. *Ch 3, skip next
sc, sc in next sc) around. 12 ch-3 loops.
>>> Continued to next message
---
 þ SLMR 2.1a þ "Hey...uh...where'd he go?" Rattrap, Beast Wars
---------------
* Origin: Cajun Clickers BBS, Baton Rouge LA. (504) 925-0906 (1:3800/54)

SOURCE: echomail via exec-pc

Email questions or comments to sysop@ipingthereforeiam.com
All parts of this website painstakingly hand-crafted in the U.S.A.!
IPTIA BBS/MUD/Terminal/Game Server List, © 2025 IPTIA Consulting™.