Hello JACK!
On 23 Feb 95, JACK BESTRO hammered on the keyboard to BARRY BURKE:
 JB> How would I wire the digital multimeter? If I wire it to the leads
 JB> then I won't be able to feed current to my battery. Please help
 JB> me understand this.
If you're using the cheapo Tamiya connectors, you can usually shove the
probe tips down into the connector next to the wire and make contact.
My charger has two threaded binding posts on the faceplate that are
intended for direct wiring (like charging packs that are soldered to
the motor, hence, no connector).   These posts are in parallel with
the output leads... you can connect the test probes to those posts.
The VERY cheap chargers don't have these, but it's not hard to wire
them in.
C-ya! Rich
--- GoldED 2.40
---------------