Hello Pavel,

On Tuesday May 17 2016 13:36, you wrote to me:

 PG> Multihome usually implemented on specialized hardware routers.
 PG> Linux server with binkd and multiple network interfaces is exotic
 PG> configuration. Two uplinks, hardware router, then PC with binkd is
 PG> more common solution.

We are an amateur network. What is exotic for the professional may be common
for the amateur. Two network interfaces is what I have here. One is the LAN
card in my PC, that gets its IPv6 address from the router wehere my he.net
tunnel ends. The other is the virtual interface AICCU that terminates my SixXs
tunnel.

 MvdV>> Anyway, even when one is single homed, it is normal to have
 MvdV>> mmultiple addresses on IPv6. Link local, ULA, SLAAC, static,
 MvdV>> DHCP6 and one or more PE addresses. Any of these addresses
 MvdV>> could be the target of an incoming binkp connection and it may
 MvdV>> be usefull to optionally log it for debug purposes.

 PG> I do not object adding this information with debug log level.

Good! Then please do so.


But then... When you have added the code anyway, it would not be more than a
few lines to also activate it as an option in all log levels as I proposed
wouldn't it?


Cheers, Michiel

--- GoldED+/W32-MSVC 1.1.5-b20130111