You where writing to Sean Dunbar;
> the gear oil) and the axles slide right out. My Impala on the other hand
> just has a standard read end and the drums come right off although I don't
> like
> the fact that the tires have to come off to adjust the brakes. There is no
> hole on the back side of the backing plate to adjust them with. Perhaps
> I should take my air hammer and fix this.
Landon, if you look at the backing plate of GM drum brakes, you will see a
faint outline of a standard knock-out as found at the rubber plugged front
adjustment hole (if equipped with front drums). Sometimes the BFH and a
punch will get them out. Otherwise, drill it out to size so you can put a
plug in it.
Alex.
 | AmiQWK 2.7 - S/N 0261 |
... To a man with a BFH and a Gas Hatchet, nothing is impossible.
--- OLMS 2.60p.a1+ [EPMBP73M]
---------------