On 26 Feb 1997 17:21, Alan Zisman (1:153/9) wrote:
 AZ>Tim  Eagan said to All   on 02-25-97 23:46: 
 AZ>
 AZ>TE>Trying to install my HP ScanJet 5pse under NT and failing 
 AZ>TE>miserably. My Scsi adapter (adaptec 2940) sees it just fine 
 AZ>TE>but
 AZ>TE>beyond that I can't get the software to install. I thought 
 AZ>TE>32 Win95 installs would run. Alas and Alack !
 AZ>TE>Any gurus out there with scanners on NT 4.naught ?
 AZ>
 AZ>Scanner support is very lacking in NT... the only scanner model 
 AZ>supported 
 AZ>out of the (NT) box is the HP Scanjet2CX. A few other models 
 AZ>have 
 AZ>NT-specific drivers... I'm looking at a low cost ($329 CDN) 
 AZ>Microtek 
 AZ>ScanMaker E3 that promises both W95 and NT drivers.
 AZ>
 AZ>As you've found out, W95 drivers generally don't work under NT.
Mustek now supplies a beta driver for the 1-pass and 3-pass flatbed scanners 
on their taiwanese webpage for WinNT 4.0. These drivers will only work in 
combination with an adaptec SCSI controller or the Mustek DTC interface card. 
Users who received an AZ interface with their scanner can obtain a DTC card 
from Mustek for about $25? (DM 60). The drivers work, until now I found that 
the Ulead ImagePals GO application (16 bit) is the only application that does 
not work, other Twain applications seem to work without problems.
The address is: http://www.mustek.com.tw
Cheers
Ernie
--- GEcho 1.00
---------------