| TIP: Click on subject to list as thread! | ANSI |
| echo: | |
|---|---|
| to: | |
| from: | |
| date: | |
| subject: | Seal Again :-(( |
Hello All hope you are having a good day :-)!
About: Seal Again :-((
I have a problem with getting seal to work properly. It writes a message
to my message base and at the same time corrupts the message area requiring
me to run sqfix..:-( I cannot get it to send a message to my uplink asking
for the echo let alone perform properly.
I would like Seal to rad my netmail which it does send my downlinks a copy
of the reply, then send my uplink a request for the echo if I have not
already got it, if I have it add my downlinks to the echo.
I do not need the file areas looked after as ALLFIX does that for me.
Seal *must* run on auto pilot, *I do not want to babysit it*. This has
become a major PITA for me, I guess I don't get the concept. This is an on
going project and one of the things to fully automate my system.
Frustrated YES. Annoyed MAJOR. I have been told this should work...NOT.
Seal.log:
+ 22 Oct 08:15:34 SEAL Begin, Seal v0.50 (mem=285K)
# 22 Oct 08:15:34 SEAL Scanning netmail I:\ECHO\MATRIX
# 22 Oct 08:15:35 SEAL Open request from Gord Hannah (1:17/23.1)
22 Oct 08:15:35 SEAL (Echo) TEAMOS2 Not found
: 22 Oct 08:15:36 SEAL Msg (query) to Gord Hannah (1:17/23.1)
: 22 Oct 08:15:36 SEAL Msg (reply) to Gord Hannah (1:17/23.1)
! 22 Oct 08:15:37 SEAL ERROR: Run-time Error 100 at 2f61:0454
+ 22 Oct 08:15:37 SEAL End. (length=0:03, mem=275K)
Seal.ini:
[Global]
Sysop="Gord Hannah"
Attr=LPH
Pointnet=0
Backup=No
MatchZone=Yes
GroupLines=No
Optimize=No
DeleteBad=Yes
Registration=xxxxxx <---I am a registered user
Language=ENGLISH
LongNames=No
SwapSize=0
LongPaths=No
Max3=Yes
[Areas.Bbs]
Level=0
Locks=
Description=
Dimension=2
[Filenames]
Squish=C:\BBS\SQUISH.CFG
Tic=C:\BBS\TIC.CFG
Queue=SEAL.QUE
Delete=SEAL.DEL
Pause=SEAL.PAU
Language=ENGLISH
EchoRescan=SQRESCAN.BAT
FdRescan=
UEFTS=
FileStat=
[Template]
EchoArea="EchoArea %20t %25p %10s %n"
EchoSpec=";EchoSpec %20t %3a %3l %d"
FileSpec=";FileSpec %20t %3a %3l %d
EchoRescan="SQUISH RESCAN %t %a"
FileList="%12f [ 0] %d"
[Log]
File=SEAL.LOG
Level=6
FD=no
[EchoAreas]
Alias=AREAFIX,AREAMGR,ECHOMGR,SQAEM
NewPath=i:\echo
[FileAreas]
Alias=RAID,TIC,TICK,FILEMGR,ALLFIX
NewPath=h:\
[Message]
Copies=yes
INTL=no
PID=yes
FakeName=Seal
KillProcessed=no
LeaveUnRcvd=no
ShortList=no
ShowFeeds=yes
NotifyList=no
RespondLinked=yes
RespondList=yes
DefaultDescription=
Split=12
[Files]
CRC=yes
Fido=yes
Rad=yes
Replace=yes
FileList=no
OldFiles=
MultipleDesc=no
In=C:\MAIL\INBOUND
Hold=E:\badfiles
SendAs=Seal
[Announce]
To=All
From=Seal
SubjectFile="New file announcement"
SubjectArea="New area announcement"
HeaderFile=
FooterFile=
NewAnnounce=
[MsgArea.Ctl]
Area=%#
Extra=
TagDesc=No
[FileArea.Ctl]
Area=%#
Extra=
Upload=
TagDesc=No
[Security]
ValidateName=yes
CheckFreeRide=no
ShowProtected=no
Secret=no
IgnoreFrom=
NoQuery=no
NoHelp=no
NoPause=no
NoTic=no
NoNotLinked=no
NoRescan=no
[OpenSystem]
OpenSystem=Yes
Level=0
Keys=
Attr=LPC
;
; NODELINKS
;
; addr=name,pw,level,keys,dlevel,dkeys,attr,flags,mgmt,lang,akas
;
; Where: addr = Address of this nodelink
; name = Name of the nodelink
; pw = Password for this nodelink
; level = Access level for this nodelink
; keys = Keys for this nodelink
; dlevel = Display access level
; dkeys = Display keys
; attr = Message attributes for messages to this nodelink
; P = Private, K = Kill/Sent, L = Local, C = Crash
; H = Hold, I = Immediate (FD), D = Direct (FD)
; flags = Flags for TIC.CFG entry for this nodelink
; * = Accept files, & = Ignore when sending
; F = Send FLE file (not processed)
; T = Don't send TIC file, C = Crash, H = Hold
; P = Pre-released (not processed)
; mgmt = Management flags for this nodelink
; M = Remote management, S = Automated system
; F = Don't allow a free ride, X = Exclude from notify
; R = Forward requests
; lang = Language for this nodelink
; akas = Akas for this nodelink
;
[NodeLinks]
1:17/23.1 "Gord Hannah" xxxxxx 0 * 0 lc *& s english
1:17/23.4 "Gord Hannah Jr" xxxxxx 0 * 0 lc *& s english
1:17/23.6 "Shannon Dejong" xxxxxx 0 * 0 lc *& s english
;
; ECHOFEEDS
;
; addr=name,pw,level,locks,attr,aka,cne,switches,group,announce,dir,nodes,lists
;
; Where: addr = Address of your uplink
; name = Send requests to this name
; pw = Password
; level = Access level to assign to areas created from this feed
; locks = Locks to assign to areas created from this feed
; attr = Message attributes for messages sent to this feed
; P = Private, K = Kill/Sent, L = Local, C = Crash
; H = Hold, I = Immediate (FD), D = Direct (FD)
; aka = Send messages to this feed from this address
; cne = (create new areas)
; switches = Switches for EchoArea line
; -0 = Pass-through
; -$ = Squish
; -$d = Kill/days
; -$m = Kill/max msgs
; -$s = Skip msgs
; -f = *.MSG
; -s = Strip private
; -h = Add private
; -a = Add new areas to AREAS.BBS
; -p = Send mail/packet from aka
; -x = Don't accept from node
; -+ = Add to Seen-bys
; group = Area group to add new areas to
; announce = Announce new areas in these echos
; dir = Directory to create new areas in
; nodes = Link these nodes to new areas
; lists = Forward lists; {at} = FIDONET.NA format
;
[EchoFeeds]
1:351/1 areafix xxxxxx 0 plh cne -0 announce
;
; FILEFEEDS
;
; addr=name,pw,level,locks,attr,aka,cne,flags,group,announce,path,nodes,lists
;
; Where: addr = Address of your uplink
; name = Send request to this name
; pw = Password
; level = Access level to assign to areas created from this feed
; locks = Locks to assign to areas created from this feed
; attr = Message attributes for messages sent to this feed
; P = Private, K = Kill/Sent, L = Local, C = Crash
; H = Hold, I = Immediate (FD), D = Direct (FD)
; aka = Send messages to this feed from this address
; cne = (create new areas)
; flags = Flags for TIC.CFG entry
; * = Accept files, & = Ignore when sending
; F = Send FLE file (not processed)
; T = Don't send TIC file, C = Crash, H = Hold
; P = Pre-released (not processed)
; 0 = Create pass-through areas
; group = Area group to add new areas to
; announce = Announce new areas in these echos
; path = Path to create new areas in
; nodes = Link these nodes to new areas
; lists = Forward lists; {at} = FILEBONE.NA format
;
[FileFeeds]
;1:351/1=xxxxx,,0,a,plc,,No,*
;1:109/921=xxxx,,0,a,plc,,No,*
;
; PROTECTED AREAS
;
; tag=type,level,locks
;
; Where: tag = Area tag
; type = "echo" or "file"
; level = Access level for this area
; locks = Locks assigned to this area
;
[ProtectedAreas]
SHAREWARE_SUPPORT=Yes, ;I moderate this echo
DIRTY_DOZEN=Yes, ;I co-moderate this echo
ECHOLIST=Yes, ;Successful Echo List updates
TERMINAT=Yes, ;I am a beta-tester here.
VIRUS=Yes, ;I am acting Moderator.
VIRUS_INFO=Yes, ;I am acting Moderator.
Hope this helps. Keep us posted.
We are a fine board trying to make it better.
http://www.geocities.com/Heartland/Plains/3782
ghannah{at}pris.bc.ca
Gord
--- timEd 1.10.y2k+
* Origin: Marsh BBS (c) [Dawson Creek BC Canada] 1-250-786-7921 (1:17/23)SEEN-BY: 396/1 632/0 371 633/260 267 270 284 371 634/397 635/506 725 728 SEEN-BY: 639/252 670/218 @PATH: 17/23 351/1 170/400 396/1 633/260 635/506 728 633/267 |
|
| SOURCE: echomail via fidonet.ozzmosis.com | |
Email questions or comments to sysop@ipingthereforeiam.com
All parts of this website painstakingly hand-crafted in the U.S.A.!
IPTIA BBS/MUD/Terminal/Game Server List, © 2025 IPTIA Consulting™.