From: Douglas Smith 

Look at Acronis True Image (www.acronis.com).  The install will create a
boot CD.   It also supports NT SP6.

 - Doug.




In article ,
STOPtechieSPAMpunditNOW{at}STOPfutureSPAMpundit.comNOW says...
> I want to duplicate my hard drive which has 3 partitions onto a much bigger
hard
> drive. I can't run the latest version of Symantec Ghost since it does not
have NT
> listed as supported. DriveImage is no longer sold since Symantic bought
PowerQuest.
>
> Here is what I'd ideally like to do:
>
> 1) Buy a new big EIDE hard drive.
>
> 2) Install the new EIDE hard drive as the second hard drive on an NT machine.
>
> 3) Create 3 partitions on it that are bigger than the existing 3 on the
existing hard
> drive.
>
> 4) Copy the 3 partitions (including the stuff that makes it bootable) to the
new hard
> drive.
>
> 5) Remove the old hard drive.
>
> 6) Make the new hard drive into the master.
>
> 7) Reboot into NT.
>
> Alternative: Backup onto CD and restore from CD to a new hard drive.
>
> 1) Run software that backs up onto CD.
>     This software has got to know how to tell the CD to run at a slower speed
because
> it is my experience that this CD writer does not keep up if going at full
speed.
>
> 2) Take out the old hard drive.
>
> 3) Put in the new hard drive.
>
> 4) Boot off a floppy or CD to run the restore software.
>     I'm not clear on this point. Can all CD drives be used to boot off of?
>
> 5) The restore software would have to know how to partition the new drive
with bigger
> partitions than the old disk had. Or I'd need to partition it in advance? But
if it
> was partitioned in advance would it be able to be made into a bootable drive
by the
> restore?
>
> 6) Restore from CD.
>
> 7) Reboot into NO.
>
>
> Any suggestion for software that will let me do either of these approaches?
>

--- BBBS/NT v4.01 Flag-5