Joe Schweier wrote in a message to All:
 JS> I'm new to Bink so be gentle.  I'm using the latest gama that was
 JS> released by the XE group of people.
 JS> I have a ZyXEL 2864I modem and can get the modem to respond with a
 JS> "CONNECT FAX" when a fax call comes in....I can't get Bink to drop
 JS> out and bring up BGFAX. 
 JS> Ideas??
I'm using a USR on the BBS but the following is my second line's exit to 
BGFAX. You'll need to change the "+FCO"s for a start but I'm not sure if FAX 
or CONNECT FAX would be used.  I'm using OS/2 so you may have to make some 
other changes.  One other item is that ModemFax message may have to be placed 
before the CONNECT message in the modem strings section.
 
-----------------------8<-cut-here--------------------------------------
ModemFax       +FCO
ExtrnMail      99 +FCO
FaxBaud        115200
-----------------------8<-cut-here--------------------------------------
And this is the EXTMAIL.CMD file I'm using:
-----------------------8<-cut-here--------------------------------------
@echo off
rem %1 = speed of the computer-to-modem link rate in bps
rem %2 = caller's connect rate reported by the modem
rem %3 = the comm port in use (or in OS/2 and Win32, the port handle in use)
rem %4 = time to the next event in minutes
rem %5 = errorlevel exit in your ExtrnMail statement(default 99)
rem %6 = extended info in the modem connect string (/ARQ, etc.)
if %5.==99. goto fax
goto end
:fax
cd \binkley\bgfax
rem frec -task%TASK% -p%3 -sWAIT_OK
bgfax2 /fco:4 c:\binkley\bgfax h%3 z /pid:02 /dis:239
cd \binkley
:end
exit
-----------------------8<-cut-here--------------------------------------
Regards,
       David 
--- timEd/2 1.10+
---------------