Hello Julian,
Thursday September 25 1997, Julian Wang writes to Davide Santachiara:
 DS>> I tried to connect with different 33.6k modems with the latest beta
 DS>> (1.18c) but I always got...
       ~~~~~
 DS>> 28800/28800/...
 JW>  The Elite is only support 28800, not support 33600
jepp only the 1.18b version support up to 31200 bps.
This is all Beta-Firmware!
>==== Begin 118B.RLN ========================================
     Release Note on Elite 2864 Release Version 1.18b June 24,1997
Fixed Modem bugs:
-----------------
 1.The "Callback Security *G2" on Elite 2864 series is not compatible with 
U1496
   srries.
 2.The report of Rx Level is not correct.
Add Performance and stability:
------------------------------
 1.Add "V.34bis protocol" to achieve 31200 bps connection.
 2.modify the value of EQM to add higher
>==== Begin 118C.RLN ========================================
     Release Note on Elite 2864 Release Version 1.18c August 06,1997
 1.The "Callback Security *G2" on Elite 2864 series is not compatible with 
U1496
   srries.
 2.The report of Rx Level is not correct.
 3.Modem will not repeat generation of answer tone in leased line mode when
   s57.1=1 is set.
 4.The Connect message format is not correct (CR,LF are missed) when 
+FAA=1",
   "+FClass=2.0" is entered.
 5.Increase the stability of data transfer in sync mode.
 6.Special problems for Russia
   -The default Caller ID settings are not correct.
   -The dial tone detection sometimes fail when "ATDT9W8W10...." is entered.
   -Ring volume can not adjusted by ATNn .
   -Modem will get false Ring if you dial digit form attached telephone set.
   -Busy is not detected when call is originated in &N17 or any other non
    multi-auto mode.
New Feature:
------------
 1.The Caller ID settings for Russia can be save in NVRAM if "&Wn" is 
ntered.
   -press D/V key then power on to do hardware reset is needed
Bye
Boris
* Ezycom Support/Registration Germany *
e-mail: bh@comports.com
--- GoldED/386 3.00.Alpha5+ via Ezycom/2 1.49b2+
---------------