JB> MO> but I have encounterd the following problem.
JB> MO> My NIC is configured for PORT 340h and IRQ 5, but
JB> MO> NE2000 for POR 300h and IRQ 3.
JB> MO> Helas, I can not change to IRQ 3 and PORT 300h because I have
JB> MO> a modem on COM2 and a SCSI-adapter at 300h.
JB>put this in your net.cfg
JB>------------
JB>link driver NE2000
JB>   port 340
JB>   int 5
JB>------------
JB>Joost Bekkers
JB>Cosysop in het FirstChoice Sysopteam
JB>joost.bekkers@first.iaehv.nl
If this is 3.11 and your driver is compiled, you will need to recompile
your driver AND either manually or softset (depending on your NIC) set
the port and IRQ on the network interface card.
If I remember 3.11 correctly you are unable to use the higher IRQ's 10,
11 etc. 3.12 is easier to set via net.cfg and you get the higher IRQ's.
]\/[ike
--- DBSMail V2.00c [6758B3FC]
---------------