Hello all,
I need some help!!
I currently run one line on my bbs. I'd like to add an additional
line, but am having problems installing the second modem.
I am succesfully running on COM1, IRQ4, BASE: 03F8H a 28.8, v34 modem.
On COM2, IRQ3, BASE: 02F8H, I am totally _unsuccessfully_ (attempting)
to run a 14.4 v42 modem.
My problem is, when I go into the COM program it says: CTS signal is
down. Clear to Send AND Data set ready are both showing up as NO. The
uart is only an 8250 (I don't know why though.. It shouldn't really
matter). These modems are both internal. Here's a 'clip' from
MS-Diagnostics (MSD.EXE)
þÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ COM Ports ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ¿
³ COM1: COM2: COM3: COM4: ³
³ ----- ----- ----- ----- ³
³ Port Address 03F8H 02F8H 03E8H N/A ³
³ Baud Rate 2400 2400 2400 ³
³ Parity None None None ³
³ Data Bits 8 8 8 ³
³ Stop Bits 1 1 1 ³
³ Carrier Detect (CD) No No No ³
³ Ring Indicator (RI) No No No ³
³ Data Set Ready (DSR) Yes No No ³
³ Clear To Send (CTS) Yes No No ³
³ UART Chip Used 16550AF 8250 8250 ³
ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³ OK Ü ³
³ ßßßßßßßß ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
If you can help me, PLEASE write back!! Thanks in advance...
Patrick Campbell
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
FidoNet: Patrick Campbell@1:2604/519
Internet: PCampbell@Magsystems.com
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
--- PCBoard (R) v15.21/2
---------------
* Origin: The Eagle's Nest * Ridgewood, NJ * (201) 670-7546 (1:2604/519)
|