-=> Quoting Scott Christensen to Pete Hopping <=-
 SC> Pete Hopping writes in a message to Brent Hendricks
 PH> So, no it's not the data channel. Besides I can hear snippets
 PH> of voice in the signal thats dropping out.
 SC> As a person who programs and debugs trunked radios, there are a couple
 SC> of things that can cause this - even on a nearby system...
 SC>
 SC> 1: wrong "connect tone" programmed into the transmitting radio.  (This
 SC> one will drive you nuts - particularly if the radio programming
 SC> template was supplied by the trunking SMR provider!)
 SC> 2: transmitting radio off frequency or has a frequency stability
 SC> problem. 3: interference (or image) from some other trunked system.
 SC> 4: bad transmitting radio - like a bad mic cord. (But you think they
 SC> would figure this one out and fix it.)
 SC>
 SC> So most of these are out of your control...
I'm currently leaning towards the theory that I have an incorrect frequency
entry someplace in the scanner, or a bad talkgroup code that's almost, but
not quite, right. The problem is I can't hear enough voice on the dropping
out signal to determine what it is.
It might be an image or intermod, as you mentioned as I have a cellphone
repeater site very close to the house...not even a quarter mile away.
So I have any number of possibilities. GRRR...
___ Blue Wave/QWK v2.12
---
---------------