-=> Quoting John Hentsch to All <=-
 JH> I've had a problem pop up recently I can't seem to fix it. OS/2 Warp
 JH> version 3 FP 25 doesn't seem to know when a new diskette has been
 JH> placed in the A: drive. It use to work and I recently noticed that
 JH> OS/2 isn't recognizing the floppy change. Must'a happen after the
 JH> FixPack #25 install becuase I installed the fixpack by diskette.
 JH> For example, if I run a DIR command on diskette #1, OS/2 displays
 JH> fine. I pop in diskette #2 and run a DIR command again, and the same
 JH> directory for diskette #1 is still shown.
 JH> I seem to remember something about the switch command on one of the
 JH> *.ADD drivers in the CONFIG.SYS file.
 JH> Could someone how know of this problem tell me how to correct this
 JH> condition? Could this condition been cause but something in FP25?
 JH> I have a new ZIP drive sitting here that I want to install. I either
 JH> am going to update to fixpack #26 or install Warp v4 -> FP6 over Warp
 JH> v3.
 JH> Thanks,
 JH> jh -
Hi there John did you remember to Close the window and retry opening it 
ain?
if so does the Drive light come on when the second Diskette is in the Drive?
Eric
--- Blue Wave/OS2 v2.30 [NR]
---------------