Hello Venno,
 >
 >
 >HH> File : EI_E209.ZIP (467468 bytes) Date : 13-08-97 CRC  : 9D9E68E3
 >HH> Desc : Elite 2864I, EuroISDN "DSS1" d-channel protocol v2.09
 >HH> (05/08/97)
 > So I dl'ded it immediately from ftp.zyxel.co.at (because I still have no
 > dutch ZyXELnet connection due to my boss not responding) and expected it
 > to contain this 1.18b analog version too, but... it still contained 1.16.
 >
 > Do I have to wait till there is 209a version or some other way to
 > incorporate 1.18b?
 >
Hmm - here a posting of an answer that i get last day about that :
>----------- 8< ON ------------------------------<
Wed 20 Aug 97  7:10
By: Manfred Recla
To: Horst Hackenbruch
Re: No newer analog part in Elite 2864I firmware ?
-----------------------------------------
Hello Horst!
Dienstag, 19 August 1997 17:37, Horst Hackenbruch wrote to Manfred Recla:
 HH> have you any answer about the old analog part in the new v2.09 ?
 the v1.16 is stable enough...
 HH> Plans Zyxel not longer an actual analog part in his new firmware
 HH> upgrades ?
 yes for sure - but ZyXEL R&D is testing the overall stability, so if
 newer analog firmware causes some problems, the decision has been made
 not to upgrade the code for analog modem part.
 Currently I don't know when there will become available any newer
 ISDN firmware with upgraded analog modem part...
 mfg. Manfred
>--------------------------- 8< OFF -------------<
cu Horst
p.s. the 31k2 modi from the beta test firmware v1.18b
     comes not out in the public/final releases.
     Why  ---> it is not stable enough.
     Then all Elite/Omni models has hardware limits
     that allows "as maximum (and stable)" 28k8 analog transfers.
     Only the U336 series supports higher analog rates as 28k8.
---  InterMail v2.50ml\e1018 bstuff
---------------