On (30 Jun 97) John Donohue wrote to Janet McCain...
JD> I think that using WIN95's networking on the 3 machines you specify
JD> would probably be adequate for your purposes.
JD> Depending on your applications software, (i.e., your shared app is DOS
JD> or Windows 3.1x based) you might want to run Windows for Workgroups or
JD> even Microsoft Client for DOS on the 486 instead of Win95.....
I think this is the way I will go.
JM> They will probably not be on the internet, but if so, would be
JM> just a PPP.
JD> A dial-up on demand setup would cost you a 28.8 or 33.6 modem
JD> ($150+-), a phone line for it ($30+- a month) and an account with an
JD> ISP ($20-$40 a month) for the PPP connect.
Already have 1 and 2, I can get 3 for $15.00 per month.
JM> I know I need to add more ram but my question is about the fact
JM> that the 486 is VESA, not PCI - will that cause problems, and
JM> what is the workaround for that situation?
JD> usually not an issue. Vesa Local Bus motherboards usually have SIMM or
JD> SIPP memory slots, just like the PCI motherboards. The only possible
JD> snag is if the 486 doesn't have any open ISA slots to add a network
JD> card, in which case you'd have to buy a VLB network card.
What my question was originally addressing (badly) was the
NIC for the 486. I am sure there is an open ISA slot - there
is nothing in that computer except the video card.
JM> We would like to be able to accomplish this for around
JM> $6500-7000 if that is not a joke.
JD> It's doable. The biggest chunk of money will be buying the two Pentium
JD> boxes. Upgrade the 486 to at least 16 megs. A network card for each
JD> machine. I'd recommend that you use twisted pair (10baseT) cable
JD> rather then Coaxial (10base2). You'll need a 10baseT hub, cable
JD> segments (three of them) to go from the hub to each machine.
That is what I wanted to hear - I think I am ready to bite the
bullet and write up a report for the owner and see if HE is
ready to go.
JM> and personal satisfaction. I enjoy a challenge - I took this
JD> ^^^^^^^^^^^^^^^^^^^^^
JD> Do you recall what they kept telling Bel Kaufman in "Up the Down
JD> Staircase"? ;-)
Not offhand - refresh my memory.
JD> By the time you're finished, you'll have learned quite a bit,
JD> actually. I'd suggest you hit your local library and/or bookstore and
JD> look at a few books on basic Local Area Networks; also any that deal
JD> specifically with networking using Windows95.
I have already learned quite a bit!!!! I bought one book and
a LAN magazine. Have 3 more basic LAN books on reserve at the
public library and I am beginning to feel I could carry on a
semi-intelligent conversation with someone about LAN's. I also
have a crutch. My daughter met someone who is in charge of a
network at a large local business. He has offered to look over
my "to-buy" list and also to be on the premises when we get
ready to get everything set up. He is willing to let me do the
set-up and just be there in an advisory capacity. He must be
a diplomat, too - he understand's about old ladies' egos.
Thank you so much for looking all this over and answering my
questions. I have run into some really great "computer people"
over the years.
Janet
... jmac@bv.net http://www.bv.net/~jmac
--- PPoint 2.00
---------------
* Origin: My Point of View in Cocoa Beach, FL (1:374/46.14)
|