On 08/06/18 16:49, ray carter wrote:
> On Fri, 08 Jun 2018 16:09:42 +0100, RobH wrote:
>
>> I have put together a motion sensor with a camera on a PiZero. I got it
>> working fine for a the first few days, then it just stopped working. I
>> then ordered a new motion sensor, but the problem still remains.
>>
>> I ran this raspstill -k to check the sensor and camera were working, but
>> they are not, and told to check the camera cable.
>>
>> I have un plugged the camera cable at both ends, then re seated them,
>> and made sure they were fully in the socket before I pushed back the
>> clip. There is no change at all, so what else could it be.
>> I have unplugged the jumper wires from the PiZero, and reconnected them,
>> but still no change
>
> FWIW - some time back on one of my rpi2B's, the camera stopped working. I
> later realized that it happened after an 'rpi-update', which I used to do
> regularly. I downloaded a new raspbian image and put it on another sd
> card - presto, the camera worked again.
>
> Suggest you do a clean install to a new card and see if that solves it.
>

Nope, a clean install did not solve the problem, but thanks for saying it

--- SoupGate-Win32 v1.05