I have put together a motion sensor with a camera on a PiZero. I got it
working fine for a the first few days, then it just stopped working. I
then ordered a new motion sensor, but the problem still remains.

I ran this raspstill -k to check the sensor and camera were working, but
they are not, and told to check the camera cable.

I have un plugged the camera cable at both ends, then re seated them,
and made sure they were fully in the socket before I pushed back the
clip. There is no change at all, so what else could it be.
I have unplugged the jumper wires from the PiZero, and reconnected them,
but still no change

--- SoupGate-Win32 v1.05