Message-ID: 
Newsgroups: AIRGUN.LIST
Organization: Mac-1 
Richard Saiki wrote:
> 
> Tim,
>   Thanks for the tip.  While doing the adjustment, I noticed too that
> the
> screw that toggles the cam was loose thus causing the initial problem.
> 
> I've only been able to test it with a felt cleaning wad and the
> adjustment seems to have done the trick.  Thanks again.
> 
> -Richard Saiki
> 
> ps. Any chance that you will put a "used" list on your web page?
> 
No. Sorry. It is just to much hassle to keep it updated and it is
worthless when it isn't up to date so we aren't going to have it on the
web site anymore. If you are interested in any particular thing we can
put you in the want box and let yoyu know when something you want comes
in.
Later
Tim
-- 
MAC-1 Airgun Distr./McMurray & Son   Phone 310-327-3581 FAX 310-327-0238
http://www.mindspring.com/~airguns/  Hours-M,Tu,F,Sa 11:00AM-6:00PM PST
13974 Van Ness Ave.                  Tim McMurray
Gardena, CA 90249 USA                mac1@concentric.net
--- QScan/PCB v1.19b / 01-0671
---------------