Hi there.
I have a ZyXEL Elite 2864I modem that has worked flawlessly for about a month 
now. Just today, it started to really act up. After haveing my BBS waiting 
for callers (issuing ATZ0 every 5 minutes), it just stops accepting any 
commands.
I have also tried to use a terminal via the comport (that runs at 115200 
locaked baudrate), and have seen that after about 20 seconds of inactivity, I 
just can't write any commands at all. TXD and RXD LEDs are not showing 
anything.
Also, if I get a connect, it can just drop the connection, even if I'm in the 
middle of writing something on the system I am connected to.
Is there anything special I should look for? Or do I have to have a ZyXEL 
representative take a look at the modem?
PS: I know my settings are good, as it has been running for a month now, and 
_nothing_ has changed. It just "became" so. The only thing that could be a 
factor, is that it has been standing on top of a external USR V.alottothings, 
and I noticed that the bottom of my ZyXEL became very warm. Can something 
have been destroyed inside the ZyXEL?
Ps2: the number in the origin is for the time being out of function, due to 
this.
Rune
--- BBBS/2 v3.33 How-D
---------------