Hello All!
I have been running into a problem, setting up my ZyXEL Elite 2864I modem for 
ISDN. Due to some hardware problems I have been using my ZyXEL upto now as an 
V34 modem. I wanted to tackle all of my other problems first - in which I 
succeeded. Now I would like to run my OS/2-based system under ISDN, but I do 
fail to understand how.
Appearantly tou do need an additional piece of user's manual to have my modem 
run on two ISDN-lines, but I failed to receive that part of the manual. I did 
get the ZCAPI.COM file as well as a Windows version of it, and I got CFOS 
registered for a long time already. I do not know yet how to combine these 
parts...
At the moment I am adding the following lines to my configuration I will get 
an error on the ZCAPI.COM line as well as on the CFOS line. The last one 
mentions there is no ISDNCAPI found, so I tried to add a SET-statement. 
Ofcourse the RUN-statement is run AFTER the other programs are loaded (ÿwhich 
is causing the CAPI-errorÿ), since it is a DOS-program. I have found several 
TELES-CAPI drivers, but ZyXEL drivers seems to be very scarce... Following my 
try-outs and my (ÿstill validÿ) SIO-settings.
REM SET CAPI=F:\COM\FS
REM SET CAPI=F:\COM\FS\ZCAPI.COM
REM SET ISDNCAPI=F:\COM\FS
REM SET ISDNCAPI=F:\COM\FS\ZCAPI.COM
REM RUN=F:\COM\FS\ZCAPI.COM /C1 /C2 /S0 /T1
REM DEVICE=F:\COM\FS\CFOS.SYS COM2 COM3 -KX
REM DEVICE=F:\COM\FS\VCFOS.SYS
RUN=F:\COM\FS\CFOSD2.EXE
DEVICE=D:\SIO\SIO.SYS (2:57600,2F8,3,-,F) (4:57600,2E8,7,-,F) 
DEVICE=D:\SIO\VSIO.SYS
DEVICE=D:\SIO\VX00.SYS
Is there anyone around who is willing and able to show me the way to run my 
ZyXEL ISDN? I am still wondering how to implement the CAPI-part, the 
CFOS-instructions seem to be very clear...
Cya,
     Paul.
--- timEd/386 1.10+
---------------