On Fri, 18 May 2018 18:07:11 +0100, RobH  declaimed the
following:

>On the PiZero I did mount //NAS/mnt/CCTV/PiZero /mntCCTV/PiZero and it
>returned:
>Password for root@N/NAS/mnt/CCTV/PiZero.
>So I used the PiZero password as I didn't know what else to use.
>

 Since you tend to be typing everything in these posts rather than
cut&pasting directly from the RPI console window it is difficult to tell
what may or may not be a typo...

 It wants the password for the root account on the NAS... As it said:
root@N/NAS/mnt/CCTV/PiZero

>Refer to mount.cifs(8) manual page

https://manpages.debian.org/stretch/cifs-utils/mount.cifs.8.en.html

You need to pass username and password options to the mount command
(especially if the NAS login is not the same as the R-PI user).

You probably also need to "umount" these to clean up partial operations.




--
 Wulfraed                 Dennis Lee Bieber         AF6VN
 wlfraed@ix.netcom.com    HTTP://wlfraed.home.netcom.com/

--- SoupGate-Win32 v1.05