On 18/05/18 15:14, Björn Lundin wrote:
> On 2018-05-18 13:47, RobH wrote:
>> On 18/05/18 11:24, Ahem A Rivet's Shot wrote:
>>> On Fri, 18 May 2018 10:23:03 +0100
>>> RobH  wrote:
>>>
>>>> I am not doing the mount on my NAS box, only on the Pi Zero.
>>>>
>>>> And I am not sure if you saw my reply to you after you supplied the new
>>>> python code for me to use, but I am getting this when I run the said
>>>> script.
>>>>
>>>> After I created the the said folders on the Pi Zero ie /mnt/CCTV/PiZero
>>>
>>>      Perfect - and you have also mounted the NAS directory onto this ?
>>> If not then do so.
>>>
>>>> I then ran the python script for the sensor detection and camera , and
>>>> it returned :
>>>>
>>>> Traceback (most recent call last)
>>>>     File "intruder_recmotion.py",  line 37, in 
>>>>      shutil.copyfile(RAMname, NASname)
>>>>     File "/usr/lib/python 2.7/shutil.py", line 83, in copyfile with
>>>> open(dst, 'wb') as fdst:
>>>> IOError: [Errno 2] No such file or directory:
>>>> '/192.168.0.22/mnt/CCTV/PiZero/2018-16-16_11.25.36.h264'
>>>
>>>      Remove the /192.168.0.22 bit - the directory is /mnt/CCTV/PiZero
>>> not /192.168.0.22/mnt/CCTV/PiZero.
>>>
>> Ok I have removed the //192.168.0.22 and is now //mnt/CCTV/PiZero.
>
> NO,NO,NO
> The // in the begining signifies a machine.
> The file should be save into the directory
> /mnt/CCTV/PiZero
>
> NO // in the beginning just a single /
>
>
>>
>> The python script runs without error, BUT it does not record any file
>> from detected motion.At least, I cannot find any files in
>> //mnt/CCTV/PiZero on the PI Zero, nor on my NAS box.
>>
>> You say to 'mount the NAS directory into this'
>>
>> Where abouts in the //mnt/CCTV/PiZero does it go.
>
> As I stated several times before.
>
> on the PI:
> sudo mount .... //192.168.0.22/some/directory /mnt/CCTV/PiZero
>
> This means that the contents of *remote directory* - that is on the NAS
> is accessible from *local directory* /mnt/CCTV/PiZero
>
> in your script ON THE PI, save to *local directory* /mnt/CCTV/PiZero
> and the file will show up on the *remote directory* on the nas.
>
>
>
> It would help alot if you
> * copied the output from the commands - not just type them into the
> newsreader
> * stated on which machine you are
> * showed the python code
>
>
>
I am getting permission denied when I try to save the python script to
/mnt/CCTV/PiZero.
How can I use sudo to do that.

--- SoupGate-Win32 v1.05