| TIP: Click on subject to list as thread! | ANSI |
| echo: | |
|---|---|
| to: | |
| from: | |
| date: | |
| subject: | Re: Collaborative Online Meetings |
From: "Glenn Meadows"
Recently Scott in our NY office and I tried a Net Meeting session between
our two laptops, using a LinkSys USB2 camera. We are connected via a
private T-1 between the offices, with a Cisco 1720 router on each end, so
we can use private IP addresses, and connect direct machine to machine.
Our results were no better than using a pubic reflection server. Audio was
poor, video was jerky, audio was at many times out of sync. This is with
the built-in Net Meeting provided in XP-Pro. There is no way I'd try or
even suggest using that for a major meeting in a conference room.
We configured both sides to be on a local corporate lan, but the speeds
showing on the network usage were tiny. There was no way we could figure
out to make it anything other than the same as an ICQ Video Chat setup.
--
Glenn M.
"Gary Britt" wrote in message
news:433b1f19$1{at}w3.nls.net...
> Well I think you understand how well it works. Not at all. It comes from
> a
> design that was based upon wide open, no NAT, direct modem connections,
> and
> it was never fixed because MS wanted everyone to use MSN Chat instead.
> You
> can get some things to work like remote desktop viewing and if you're
> lucky
> video and audio from one place to the other, but not video and audio in
> the
> other direction simultaneously. You can get text chat to work and maybe
> some of the whiteboard stuff and file sending. Its simultaneous
> video/audio
> from two or more sources that won't work ever unless you are wide open to
> the net on both ends.
>
> Gary
>
> "Richard B." wrote in message
> news:lm2mj1tui247e3musjks1f5li6bd4jvqs7{at}4ax.com...
>> On Wed, 28 Sep 2005 17:10:11 -0400, "Gary Britt"
>> wrote:
>>
>> >Netmeeting is near impossible to make work properly through routers at
> each
>> >end, unless you turn on uPnP in the router and let XP at both ends
> control
>> >what ports are open
>>
>> Most everything goes through a router at some point, how does it work
>> at all?
>>
>> Sounds like my firewall would block it several time over.
>>
>> - Richard
>
>
--- BBBS/NT v4.01 Flag-5
* Origin: Barktopia BBS Site http://HarborWebs.com:8081 (1:379/45)SEEN-BY: 633/267 270 5030/786 @PATH: 379/45 1 106/2000 633/267 |
|
| SOURCE: echomail via fidonet.ozzmosis.com | |
Email questions or comments to sysop@ipingthereforeiam.com
All parts of this website painstakingly hand-crafted in the U.S.A.!
IPTIA BBS/MUD/Terminal/Game Server List, © 2025 IPTIA Consulting™.