* EleBBS Support List

Of course, let us not forget, that an ANSI editor, no matter the flavor 
was never designed or written to be used on an x64 version of Windows, 
let alone one with a TV monitor. But, fear not, I know a programmer with 
some time on his hands, that if you slip him some cash, and a free 
carton of smokes, may be able to rig something out of ElyEdit, two tin 
cans, a toliet paper roll and some aluminum foil, that maybe able to 
work on x64. But then again, maybe not.
-Steve.

Shurato Hidega wrote:
> * EleBBS Support List
>
> Apologies for the flood.  Ok, I found out that I had never disabled quick
> editing, which was intercepting my mouse clicks, but still the draw won't
> work with a several hundred line ansi.  I'll have to find acid draw again (I
> hadn't tried that recently, I often get thedraw and aciddraw confused) I
> think it handles ansi of any length (that might have been iceedit as well,
> it's been forever).  I still don't know what happened to my copy of the
> fully functional ans2pcx which would convert any length ansi to pcx, then
> I'd use paintshoppro to convert it to a gif or jpg.  Now all I can find is
> the full screen version, which isn't very helpful since a screen capture can
> do more than that...  It's hard to believe that no one else has it.  All I
> can find on ansi art sites and google is the full screen version which
> doesn't work with a several hundred line ansi.
>
> -----Original Message-----
> From: Shurato Hidega [mailto:shurato{at}shurato.net]
> Sent: Monday, June 19, 2006 11:04 PM
> To: elebbs{at}thebbs.org
> Subject: RE: EleBBS: sort of off topic... ANSI editor needed for EleBBS
> Ads.
>
>
> * EleBBS Support List
>
> actually, since I can only run thedraw on my 2k box anyway, I know it
> doesn't support my usb mouse.  Same with aciddraw and any of the other 16
> bit editors.  And since that answer was a bit vague below (I knew that...) I
> was refering to the block commands.  I guess I should try elyedit on the 2k
> box; under xp64 it's pretty sketchy with the block commands.  I end up
> deleting huge blocks of my ansi every time I try a block command.  Sometimes
> not even what's selected.  Of course, that is with the 2.0b version as well.
>
> -----Original Message-----
> From: Shurato Hidega [mailto:shurato{at}shurato.net]
> Sent: Monday, June 19, 2006 10:47 PM
> To: elebbs{at}thebbs.org
> Subject: RE: EleBBS: sort of off topic... ANSI editor needed for EleBBS
> Ads.
>
>
> * EleBBS Support List
>
> Yeah, I knew that but never could get it to work properly. On the JPG part,
> I'm creating ads for usenet and websites converted from ansi, not anything
> to be shown from within ele.  Thedraw and aciddraw don't support usb mice,
> at least not under xp64 which is my main box.  I haven't tried on my 2k box.
>
> -----Original Message-----
> From: Mike Ehlert [mailto:mike{at}pcmicro.com]
> Sent: Monday, June 19, 2006 9:34 PM
> To: elebbs{at}thebbs.org
> Subject: Re: EleBBS: sort of off topic... ANSI editor needed for EleBBS
> Ads.
>
>
> * EleBBS Support List
>
>   
>> I tried Elyedit, but couldn't figure out how to select, move and center
>> things
>>     
>
>
> Click Modes > Block Mode.
>
> Now you can use the drag the mouse to select a block, and then right
> click the block to select the following commands:
>
> Move
> Copy
> Erase
> Replace Forground
> Replace Background
> Center
> Apply forground to..
> Apply background to..
>
>
>   
>> I was planning on using Pablo  to edit, then Elyedit to save as jpg,
>> since the ansis I'm editing are several hundred lines long and won't
>>     
>
> If you are creating a screen for EleBBS, then you should not save it as
> a .JPG file since EleBBS will not display image files..
>
>   
>> Any other suggestions?
>>     
>
> I assume you have already tried TheDraw?
>
> Regards,  Mike
>
> _______________________________________________________________
>
> To unsubscribe write to "listbot{at}thebbs.org" and put the words
> "unsubscribe elebbs{at}thebbs.org" in the SUBJECT of the message.
> _______________________________________________________________
>
> _______________________________________________________________
>
> To unsubscribe write to "listbot{at}thebbs.org" and put the words
> "unsubscribe elebbs{at}thebbs.org" in the SUBJECT of the message.
> _______________________________________________________________
>
> _______________________________________________________________
>
> To unsubscribe write to "listbot{at}thebbs.org" and put the words
> "unsubscribe elebbs{at}thebbs.org" in the SUBJECT of the message.
> _______________________________________________________________
>
> _______________________________________________________________
>
> To unsubscribe write to "listbot{at}thebbs.org" and put the words
> "unsubscribe elebbs{at}thebbs.org" in the SUBJECT of the message.
> _______________________________________________________________
>
>
>
>   

_______________________________________________________________

To unsubscribe write to "listbot{at}thebbs.org" and put the words
"unsubscribe elebbs{at}thebbs.org" in the SUBJECT of the message.
_______________________________________________________________

--- Internet Rex 2.29