29 Mar 98 09:45, Jeff Edmonson said this about Filter Cap values in R-4 ? to 
Bruce LeGrande.
 >> The physical size of the new components (18x32mm)
 >> [DxL] doesn't seem to present any problems.
 JE>
 JE> Call me an ol' phart, but I don't know what 18mm is...
Ol' phart, it's less than 3/4".
 JE> rough calculations show that 18mm is somewhere around 6 inches.
 JE> 100mm in one Meter, right?
ROTFLMFAO!
No...18mm Is less than 3/4", .708" to be exact.
100mm is the same as 10cm or .1m or prezactly, 3.937"....
 JE> around 3' = 1M
3' = .9144m
1m = 39.37" or 3.28'
 JE> 50mm = 1.5' - or 1' 6"
 JE> 25mm = .75' - or 9"
 JE> 12.5mm = .375' 4.5"
1" = 25.4mm or 2.54cm or .254dm or .0254m, suppose that will confuse ya more?
 JE> Ok - So, 18mm is roughly 6 inches.... and 32mm is around 1 foot.
ROTFLMAO!
 JE> I simply -don't- believe you've got the room for that, inside the
 JE> Drake R-4.
But he does have room for a couple, two, three caps that are 18mmD x 32mmL or 
.708"D x 1.259"L.
Regards, Roy KB6PI
... A battle of wits?!?  To the DEATH?!?
--- T(W)itt Filter Tossed v1.13
---------------