-> *** Quoting Tom Walker to Rob Dennis dated 07-01-96 ***
-> > -> TW> thyough, you need a 2 meter rig that can be set for
-> "NonStandard > -> Offset"
-> > -> TW> because 6 meters uses 500 Khz instead of 600 Khz
-> > ->
-> > -> Not all of them use 500KHz Tom.
-> > -> VE3RVI in Ottawa ( 53.030/52.030 ) uses a 1MHz. split for its in
-> >
-> >   We of course can use any Split want as long it is withing trhe Ba
-> > and Emission sector. BUT for Coordinated areas 500 Khz is the
-> > Recommended split. Anyhow the premise still holds true, You NEED a
-> Only CA , Fla and Michigan use the 500 Khz split...the rest of the co
-> primarily is still  -1 Mhz offset...
  I happen to be in Califronia. But the Origional satatement is Still
correct no Matter what the split is in your area. YOU MUST use a 2 meter
rig with Settable split if you are going to use the Ten-Tek in 6 meter
Repeater operations. Not one of the older rigs with a Fixed 600 KHZ
Split like my old Kenwood 2 meter rig.
--- GEcho 1.20/Pro
---------------