Andy,

Sounds like you use BC quite a bit.

*** Quoting Andy Roberts to Rich Wonneberger dated 10-20-99 ***
> For a detailed answer write to cadware@cadware.it

Just sent it out.  I figure it was time to set up messaging in Netscrape.
Funny part, it only took a minute & I sent the message the first try.  Getting 
mail even worked the first try.

*** Quoting Andy Roberts to Rich Wonneberger dated 10-20-99 ***
> In many ways this is similar to AutoCAD and can export/import AutoCAD 
> files.

You just made my day..  :}
I dont have to re-do my AutoCad files.  There not much, but I have a lot of
time invested in them.

*** Quoting Andy Roberts to Rich Wonneberger dated 10-20-99 ***
> only have a demo version available.  If you want, I'll package up the 
> whole
> bunch including a few addon files and File Attach it to E-Mail to you.

That would be great.  I think I can take 10 meg e-mail befor my ISP squawks. 
I can also freq them over the weekend if its easier for you.  (weekend $$
rate)

*** Quoting Andy Roberts to Rich Wonneberger dated 10-20-99 ***
> Anyway IMO the Plotter probably won't be the problem.  If you have OS/2
> drivers for your particular Plotter it's simple.  If all you have is 
> WinXX
> drivers then you can save the BluePlot output to a file and probably 
> work with
> that from WinXX.  Although I don't have a Plotter, I did consider 

DRIVERS??
Ya know I didnt even think about that..  I azzumed the plotter being a serial
device the CAD program would use the com port.  I havent even connected it
actually, I just saved it from death at work.  So far, the test print is the
only thing I have done, so I'm hopefull it works.  There's another there but
its missing the pen drum, so I may still be able to get parts.  If I had room 
& a way to get it home there's a big floor model (5 ft wide) also going out.

Thanks for the help
Rich
I-Net   turtil@frontiernet.net


... SDRAWKCAB spelled backwards is backwards.
---