-=> Quoting Will Honea to Bryan Rubingh <=-

 BR> I think there is a 41 (and maybe 42) available now.  Any reason
 BR> not to just go all the way?

 WH> Best one I can think of is that they will not install on your
 WH> configuration without cheating.  You appear to be using standard Warp
 WH> 3 with LS 3 over it while fp41/42 specifically check for Warp Server
 WH> in syslevel.os2.

Wow!  Thanks much for that info.  I'd probably have been stuck without
that knowledge.  Are you saying that fp41/42 check for Warp Server &
won't install if it exists?

 BR>  WH> done with it.  That will also tweek the IBM1S506
 BR>  WH> to a level that should
 BR>  WH> handle the 20g drive.  Just to be on the safe side, throw a copy of
 BR>  WH> DANIS506.ADD in your kit - easier than chasing the IBM1S506.ADD revs
 BR>  WH> all over the place.
 BR>
 BR> I haven't checked DANIS506.ADD at all, but from messages I've been
 BR> seeing, isn't that just for the VIA chipset or does that work with
 BR> any IDE chips?

 WH> According to Daniela, it is pretty much a tossup with Intel chips but
 WH> with SIS, ALI, VIA, etc it's a much better solution.  Reason I suggest
 WH> it as a 'just in case' is that the last version she put out (on the
 WH> Hobbes site) should cover the 20gb drive without a hassle.

Thanks again for that info.  I'll certainly snag a copy of it.

  Bryan Rubingh


... Rube Ink - Custom Programming/Computer Solutions

___ Blue Wave/QWK v2.20

--- Maximus/2 2.02