* EleBBS Support List

Hi Mike,

> Did you try setting the the baud rate to 115200 in ADF? .

Locked at 57,600 (needed at that speed due to some older doors not working 
at 115,200)

> What buffer sizes do you set in your ADF command line? Try this:
> ADF.exe COM4 2E8 3 115200 4096 1024
> (Replacing the first 3 parameters to match your com port addr + IRQ)

Currently : adf COm1 3F8 4 57600 8192,7168,6144 8192
>
> What type of PC is this DOS box? Does it have 16550 UARTs or better?
> The 16450s or 8250's won't perform well. Are you running under DV or
> straight DOS?

IBm Aptiva - 450MHz job, MS DOS 6.22,  UART is a 16550

> It might be due to the serial to telnet link slowing things down. I've 
> never
> heard of Leif Bloomquist's BBS Server software before. It sounds like
> it redirects inbound telnet connections to physical COM ports under
> Windows, much like my NetModem.com server software does. Do you
> have a URL for Leifs BBS server?
>

Here - http://home.ica.net/~leifb/bbs/index.htm

Interestingly, transfer work fine with RemoteAccess 2.60 & Maximus 3.02 - 
I'm beginning to think Ele may be the root of the problem, but wanna check a 
couple of other installed packages I have.

cheers,

Lance
// http://www.commodore128.org
   Commodore 128 forums & more!
   telnet://landover.no-ip.com
   Classic DOS BBSing  since 1987     //


_______________________________________________________________


--- Internet Rex 2.29