On 10/20/1999 in OS/2 LAN (F) David Calafrancesco wrote to John
Hentsch:

DC> Then try an rmview /irq and rmview /io and rmview /mem and see if
DC> anything else is conflicting with the card.

The situation is that the system is setup as a multiboot system. The card
works fine running win98. The RMVIEW * commands don't even report the
NIC exists. However, the DIAG.EXE util program that came on the
diskette with the card sees the card and runs a test on the card and
reports it is functioning fine.

I entered 0050BAB08496, as reported by the DIAG.EXE program, for the
ADDRESS and set the SLOT NUMBER to 1 in OS/2's MPTS configuration but
OS/2 still cannot see the card at bootup.


jh -
--- Platinum Xpress/Wildcat! v1.3e
292/854