On Sunday, January 21, 2018 at 11:54:06 AM UTC-7, Nicholas Boel wrote:
> Hello,
> 
> On Sun, 21 Jan 2018 15:56:42 GMT, Palkat72 wrote:
> 
>  p> I have setup and got working Mystic BBS for Windows v1112a38 how ever
>  p> twice now it has after about a day stopped working. When I go to restart
>  p> the server program its window will pop up for a quick 1/2 second then
>  p> close.  The nodespy will work, the config
>  p> utility will work but not the actual "mis.exe SERVER".
> 
>  p> I have tried to replace the data, msgs, menus etc folders with backups
>  p> of when it was working. I even tried to replace the mystic.dat file in
>  p> the root folder with a working copy and still it wont work.
> 
>  p> I have found that I have to start with a fresh install of Mystic then
>  p> copy over my data, msg, menus, logs folders along with the mystic.dat
>  p> file then it will work like nothing happened.
> 
>  p> This is a pain so I would love to know if anyone knows what is causing
>  p> my initial problem where the mis.exe program wont start the server all
>  p> of a sudden.
> 
>  p> Currently I am running it on a windows 7 32bit environment, the first
>  p> time this issue happened I was running it on a windows 10 64 bit
>  p> environment for what that is worth.
> 
>  p> Thanks for ANY help!
> 
> The fact that mis.exe is stopping at some point is a matter on it's own, and 
> something should be mentioned in the logs as to why it shut down (try using 
> debug loglevel).
> 
> But as for restarting, if mis.exe is shut down unexpectedly, take a look for 
> mis.bsy in your semaphore subdirectory and delete it before restarting.
> 
> Regards,
> Nick

So it happened again, this time I was actually in the server window and hit the
ESC key and confirmed yes SHUT DOWN. It shut down like normal but would not
start backup.  I then went into the semaphore folder per your suggestion and
did delete the mis.
bsy and then it DID start back up. Thank you for that!

After I got the server to run again I did shut it down two more times with no
issue and each time I notice it did NOT leave behind the mis.bsy file.  So why
sometimes does it leave it behind?

I did set my logging level to 3 also. Below is a sample of the MIS log and you
will notice between the two log entry's that when I shut down the server at +
2018.01.21 21:14:00 (this is the time I saw on my clock I shut it down) there
is no "Event system 
stopped", "Manager shutdown complete" entry. How ever the second part of the
attached log you will see after I got the server to start again (deleting the
mis.bsy) then I shut it down right away it did log the "Event system stopped",
"Manager shutdown 
complete" were shut down.  I was also able to restart and shut down a few more
times after with no issue. 

.....I hope that all makes sense....

-=-=-=-=-=-=[ LOG FILE SNIPPET ]=-=-=-=-=-=-

---------------------  Mystic v1.12 A38 2018/01/01 Sun, Jan 21 2018 (loglevel
3)
+ 2018.01.21 15:48:35  MANAGER Starting event system
+ 2018.01.21 15:48:35  MANAGER Starting 1 server(s)
+ 2018.01.21 15:48:35  TELNET Listening on IPV4 port 6502 using interface
"0.0.0.0"
+ 2018.01.21 15:48:35  TELNET Listening on IPV6 port 6502 using interface "::"
+ 2018.01.21 15:48:35  EVENT Starting 0 event(s)
+ 2018.01.21 15:48:35  SENDMAILStarted. Relaying to: mail.***********.com
+ 2018.01.21 15:49:46  TELNET > Connect on slot 1/5
+ 2018.01.21 15:49:46  TELNET 1-Address  ***********
+ 2018.01.21 15:49:46  TELNET 1-HostName ***********.net
+ 2018.01.21 15:49:46  TELNET 1-Creating terminal process
+ 2018.01.21 15:50:07  TELNET 1-Closing terminal process
+ 2018.01.21 18:14:55  TELNET > Connect on slot 1/5
+ 2018.01.21 18:14:55  TELNET 1-Address  ***********
+ 2018.01.21 18:14:55  TELNET 1-HostName ***********.net
+ 2018.01.21 18:14:55  TELNET 1-Creating terminal process
+ 2018.01.21 18:15:09  TELNET 1-Closing terminal process

---------------------  Mystic v1.12 A38 2018/01/01 Sun, Jan 21 2018 (loglevel
3)
+ 2018.01.21 21:15:09  MANAGER Starting event system
+ 2018.01.21 21:15:09  MANAGER Starting 1 server(s)
+ 2018.01.21 21:15:09  TELNET Listening on IPV4 port 6502 using interface
"0.0.0.0"
+ 2018.01.21 21:15:09  TELNET Listening on IPV6 port 6502 using interface "::"
+ 2018.01.21 21:15:10  EVENT Starting 0 event(s)
+ 2018.01.21 21:15:10  SENDMAILStarted. Relaying to: mail.***********.com
+ 2018.01.21 21:15:51  MANAGER Server shutdown received from console
+ 2018.01.21 21:15:51  MANAGER Shutdown: EVENT
+ 2018.01.21 21:15:51  MANAGER Shutdown: SENDMAIL
+ 2018.01.21 21:15:51  MANAGER Shutdown: TELNET
+ 2018.01.21 21:15:51  MANAGER Waiting for servers to stop (up to 60 seconds)
+ 2018.01.21 21:15:51  SENDMAILShutting down
+ 2018.01.21 21:15:51  EVENT Event system stopped
+ 2018.01.21 21:15:52  MANAGER Shutdown complete

--- SoupGate-Win32 v1.05