To Jon & all folks on this nice echo

 -=> Quoting Jonathan de Boyne Pollard to Stewart Honsberger <=-

 JdBP> Read the _Troubleshooting_ on-line book in your "Troubleshooting"
 JdBP> folder.  Go to the _Solving Video Problems_ section under _Solving
 JdBP> operating system problems_, click on the link to _Resolving display
 JdBP> problems_ and then click on the "System will not restart on a High
 JdBP> Resolution Display" symptom. 
 JdBP> ¯ JdeBP ®

I already know what your said, but is good to
have a msg like this & start forward ... mmm 8-)

Not always I reset to VGA... If I use Trident
Drivers is not necessary, I only run the install
BUT is necessary to know EXACTLY what graphic mode a
board specified requires... (horizontal frequency,
too, for compatibility with monitor) Whit this all,
is all very good at OS2 world (here at least!).. -8)

With GRADD happen the same thing, from GRADD 0.77
to 0.80 is not needed change to VGA & THEN change
to SVGA... is very slow & cross-way works very well.

But it is valid only when anyone know what to do...

Curiosity teaches somethings ... 8)

When this method fail, the method descripted by Jon
is only chance...

== Rodrigo Cesar Banhara == rcb@iconet.com.br ==

... Interested to give me a P600 III, please leave msg for me.

---
2401/0